Precautions For Using Basic Copper Sulphate


When using Basic Copper Sulphate, you must pay attention to the following

When using Basic Copper Sulphate, you must pay attention to the following:

(1) The toxicity of copper sulfate is directly proportional to the water temperature, so it should generally be used in the morning on a sunny day, and the dosage should be relatively reduced according to the water temperature;

(2) The amount of copper sulfate is directly proportional to the fertility of the water body, the content of organic matter and suspended matter, the salinity, and the pH value. Therefore, the appropriate amount should be selected according to the specific conditions of the pond during use;

(3) Use copper sulfate with caution when the water body is alkaline, so as to avoid the formation of copper oxide to poison fish;

(4) The safe concentration range of copper sulfate to fish and other aquatic animals is relatively small, and the toxicity is relatively large (especially to fish fry), so the dosage should be accurately calculated when using;

(5) Do not use metal utensils when dissolving Copper Chloride Dihydrate Manufacturers, and do not use water above 60°C to prevent loss of efficacy. After administration, oxygen should be fully increased to prevent dead algae from consuming oxygen, affecting water quality and causing flooding;